aEco is the consumable layer of the Aether stack — fuel additives and oil stabilizers that clean the fuel system, sharpen combustion, and protect the engine from the inside. Decades of independent SGS, ASTM, SAE and EPA-method testing behind every product.
aEco attacks the same two loss mechanisms as the Aether hardware — incomplete combustion and mechanical friction — but as drop-in consumables your team can apply anywhere, with no installation. aEco products are manufactured by Flex-O ECO and offered through Aether Fleet Solutions; figures below are drawn from independent laboratory testing, the manufacturer's reports, and field cases on commercial fleets. Your own result is confirmed on your telematics.
Solid tablets that dissolve in seconds and leave no clogging residue. They clean injectors, valves and fuel lines without solvents, improve fuel atomization for a more complete burn, and stabilize fuel in storage — cutting emissions and consumption.
100% petroleum-based oil treatments — no metals, graphite, wax or detergents — that blend into any mineral or synthetic oil. They hold viscosity under heat, prevent dry starts, seal better, and reduce friction, wear, and noise.
A patented solid-additive line, tested to SGS, ASTM, SAE and EPA methods. Field cases have shown a 5% baseline drop in fuel consumption. In ASTM D-4870 lab testing it cut fuel-droplet size 15% and raised droplet count 23% for a more complete burn, and dispersed over 80% of the combustion-fouling asphaltenes that foul injectors (ASTM D-473) — a measurably cleaner exhaust, verified on the SGS / B-TRL chassis dynamometer (Millbrook Testing Grounds, Report No. 30621/03-01). Results vary by engine and duty cycle, and are confirmed on your own telematics.
The core fuel tablet for diesel and petrol engines — drop it in the tank and drive.
The fleet-duty fuel tablet, in dosing grades for different tank volumes plus cold-weather formulations.
Built for heavy and residual fuel in marine and industrial engines.
A 100% petroleum-based stabilizer line that blends into any oil and holds it stable under heat. In aEco DTM temperature-vs-mileage testing, treated oil holds its grade far longer between changes, and aEco STABIFLEX before/after used-oil analysis shows reduced wear metals in the sump — steadier compression, quieter running, and longer oil and engine life. It's one of the simplest, lowest-cost moves on the maintenance sheet: a few dollars of treatment protecting assets worth far more. Results vary by application and are confirmed on your own telematics.
Engine oil treatment that stabilizes viscosity and improves sealing, start-up, and lubricity.
Broad-application oil stabilizer for engines and powered equipment across the fleet.
Beyond the engine catalyst, Aether distributes the full Duravi line — built on Duravi's USDA Certified Biobased proprietary process, which hardens and smooths metal at the contact point. Per Duravi's published, ASTM-tested data: up to 86% lower friction and +237 HV wear resistance. Distributed under direct authorization from Duravi, Inc.
Penetrating & Lubricating Spray — an all-in-one bio-based maintenance spray.
Metal Cutting Spray — cutting fluid powered by Duravi's proprietary process for any standard metal.
High-performance NLGI-2 grease built on Duravi's proprietary process.
aEco completes the Aether system — hardware and chemistry working together across the fuel line and the engine itself.
Inline electrostatic fuel conditioning. A one-time install that reorganizes fuel before combustion.
Bio-based surface catalyst that hardens metal and cuts internal friction at the molecular level.
Fuel additives and oil stabilizers that keep the fuel system clean and the oil stable over time.
The aEco line is backed by third-party testing to internationally recognized standards — chassis-dynamometer emissions and fuel-consumption trials, corrosion and stability testing, and full oil analysis.
| Test / method | What it measures | Result |
|---|---|---|
| SGS · B-TRL | Chassis-dyno emissions & fuel-consumption trial, Millbrook Testing Grounds — Report No. 30621/03-01 | Verified |
| ASTM D-130 | Copper-strip corrosion — fuel + aEco FXO Industrial (incl. heavy fuel + 50 ppm) | PASSING |
| ASTM D-525 | Oxidation induction period @ 100°C | 360 min |
| IP 375 / 388 / 53 | Sediment, total insolubles & sediment by extraction | Within spec |
| ASTM D-4052 | Oil density @ 15°C | Analyzed |
| ASTM D-445 / ISO 3104 | Kinematic viscosity (40°C & 100°C) — high viscosity index | Analyzed |
| ASTM D-97 / ISO 2592 | Ignition / pour point | Analyzed |
| ASTM D-3120 | Sulfur content | 0.0035% |
| AAS heavy-metal screen | Ni, Pb, Cu, Cr, Zn, Hg, Cd, V, Mo | <0.002% (none) |
// aEco fuel-economy figures reflect field cases on commercial fleets; emissions and laboratory figures are drawn from independent SGS / ASTM / EPA-method testing and the manufacturer's reports. aEco products are manufactured by Flex-O ECO and distributed by Aether Fleet Solutions. Full analytical reports available on request; your result is confirmed on your own telematics.
Tell us about your fleet and we'll scope an evaluation across the full Aether stack — aeBooster, Duravi, and the aEco line — verified on your own telematics.
Request an evaluation